Two-hole washers that have two separate rotating machines. One rotating machine is usually used for the wash section and the other is used for drying machine. Have you ever had problems with the washing machine dryer that did not work. Do not just think that the machine is damaged because of many factors that can cause why the dryer does not work.
Inspection must be performed to find the real problem. sequential and regular checks will surely save time and effort. The first thing to be sure is the power source. is there any power coming into the dryer. For those who have studied electricity may not be too difficult to measure the electric current and voltage that goes into the motor. For the layman may be checked manually if there is a broken cable or not. but for more details still be measured electric current and voltage.
After the electrical source is confirmed, then the next step is to look at the condition of the capacitor. Usually the washing machine uses a starting capacitor that serves as an early motor start assistant. actually to find out whether or not the capacitor is quite easy, manually you try to turn with hand dryer fan washer dryer, if after in the turn by hand drying machine life means the starting capacitor is damaged. But be careful with the position of your hand when turning the fan, because the fan spin quite fast. Technically also can to determine the condition of the capacitor, just for more details I will discuss in other posts that let me not stand.
If a power source is present and a good capacitor, it is possible that the drying motor has been damaged. there are various reasons for this motor can be damaged. Examples such as age factor, water factor that can cause rust on the motor, overload factor so that the motor coil burned. actually the motor can still be repaired by rolling back the coil. Rather than bother thinking about how the roll, immediately brought aja deh to the dynamo rollman who would have experienced and the results are more satisfying.
0 comments:
Post a Comment