Washing Machine Repair 2 Tube Off Washing Part

To fix the washing machine 2 tubes that jammed the washers is quite easy and simple, because the operating system is still full manual, so to determine the damage is quite easy, which needs to learn how to release some parts of the machine so that in return to its position after repair is not wrong, if need to be noted.

The first step we open the back cover and then try to turn on by turning the washer timers are any signs of life, eg buzzing sound etc, if not try directly in the timer check with multitester by opening the control panel panel whether it is still connecting or not when in the play to the right or clockwise what if still connek try in check installation / cable that connects timer to washing motor, because often damaged washer caused by mouse.

Once completed and the results are good there is no problem in the control panel means the electric current has come down and into the washing motor, when the electric current has reached the motor but no sign of life at all means the motor can be sure damaged, the coil broke because corrosion, how to make sure we measure to 3 cable on that motor which normal will connect all what if there is one of 3 cable that is not connected mean motor broken. then change motor and finished our work.

Other symptoms / disturbances if the electric current has reached the washing machine but the engine is not running and there is a sign of life / there is a buzzing sound directly we check the capacitor is usually between 6 mf to 12 mf the way it can be measured by multitester paste the two ends of the capacitor cable to wires / plugs what multitester when the needle goes up and goes down means normal if the multitester needle does not move at all meaning the capacitor is broken, replace the new one and the machine is ready to try again.

If the capacitor is normal and the engine does not rotate still sounds we buzzed check the washing gear box by removing the rubber belt that connects between the motor and gear box and turn the washer fan or gear box when the weight / hand we are not strong rotate the broken gear box, replace which is new, it is like the case that I am disassembling this after the gear box washed the machine can work and work as before.

The last step when checking us from the beginning to the end of normal all including the capacitor, gear box but if the engine just buzzing just do not want to spin the motor means damaged, the damage to this motor is different from the one we described above, if the above was a broken coil if the motor that there is a sign of life / buzzing but not spinning it is possible there is a shorted (short-connected) coil and what if we hold this bike will be very hot, what if the meter with ampere meter then the ampere will increase.