How to fix a water clogged washing machine

Maybe you are all confused as to why the water in the washing machine is clogged or cannot come out when you want to throw it away. Or even just the opposite, why does the water come out while the switch knob is clearly in the off position.

The causes and solutions will only explain below. Oh yeah before, this article is intended for the type of Twin Tube washing machine. Because I use a washing machine this model, and I have never practiced it for other washing machine models.

this is a twin tube washing machine model

Twin Tube Washing Machine is the most widely used washing machine, the advantage of this washing machine is in terms of affordable prices and easy way of use so that anyone can use it, just fill the water as needed on the washing tube then put clothes, soap and turn the timer is as needed, after the washing process is finished rinsing and squeezing by moving the laundry to the dryer, it is a bit complicated because it still has to rinse and move the laundry when it wants to dry.

Well, don't need to be at length, this is the reason why the water in the washing machine is clogged or can't come out when you want to throw it away.

The cause of water in the laundry can not come out due to several factors, including:

First, usually because the dirt filter in the washing machine has been damaged or has never been opened before.

filter dirt stuck to the wall of the washing machine

This dirt filter is usually located on the wall to the right of the place to put clothes to be washed. The function of this filter is to filter out impurities during the washing process. So automatically the rough dirt in the clothes will filter by itself through the help of water and enter the filter trap.

but many people who do not know how to clean the filter, as a result are always left without draining the dirty contents. If it is like that it will cause filter dirt to accumulate for months and cause congestion.

Solution: Open the valve at the ends of the filter, pull hard on the valve on both ends of the dirt filter. Then clean it with water. Don't forget to grab clogged dirt.

Second: Usually because the wheel of the player in the washing machine gets stuck in the coin.

the hole next to the blue-blue image that is usually where the coin is entered

The second cause is usually because the sides on the player wheel are stuck in coins and the like. Thin coins that are often left in the pocket will usually easily fall and enter next to the wheel gaps. As a result, when the coin actually enters, it will clog the washing machine's swivel movement and often also cause clogged water to go to the dump.

Solution: open the middle of the player wheel using a screwdriver. Congkel with a strong screwdriver. If successful open, grab all the clogging objects and clean them.

Third: Usually the cover and opening of the waste water channel behind the washing machine is loose or not elastic anymore.

Pull each machine to elastic again

The third cause is usually the one that is behind the washing machine, which is connected to the turning knob on or off in the discharge of the water is a little outdated. So if your laundry water can't be wasted, you can check the section.

Solution: Open the engine frame cover on the back of the washing machine using a screwdriver, then pull the one that is useful as an opening and drain cover to return elastic.

What do you think, it's quite easy, isn't it. Hopefully this article is quite helpful.

This source is your own personal experience.