How to repair the washing machine

Household appliances that are often damaged and replaced are washing machines and water machines. If you are washing the water if it is damaged directly replace, while the washing machine because the price is expensive if it is damaged it must save first, there are about 3 washing machines that have filled the garage. Every time you buy a washing machine can only last less than 1 year. The amount of the washing machine is cheap, the washing machine has 2 puter dynamo, or for washing clothes and the other one for the dryer. Every time they call a repairman, they ask for things, ranging from complicated wage fees to the reason that there are no spare parts to repair if the washing machine does not heal.

This time there is no need for a repairman. Simply understand how the washing machine works, by opening the casing so that a strand of cable and rope and dynamo are seen in a narrow space. The washing machine is considered damaged when the washing machine is no longer spinning. and this condition after being examined and analyzed turns out that there are two things that most often cause damage in the washing machine.

A. Burning capacitors.

If the capacitor is burned, the impact of the dynamo will not rotate, so that the washing machine does not want to spin. The washing machine feels as if it is not connected to electricity. How to fix it replace the capacitor of the same size or slightly larger than the original size. Just bring the capacitor to the electronics store, then plug it in again. Usually washing machine capacitors have 4 cables.

B. Rubber belt (link between dynamo wheel with washing machine shaft) term automotive fanbelt

A worn fanbelt often gets out of the wheel so that the impact of the dynamo rotates but the washing machine does not react at all. So that there is vibration in the washing machine but the machine does not rotate. How to overcome the fanbelt behind the side that is not worn or replace it with a new fanbelt.

If the two devices above have been checked but the washing machine still does not react, check the condition of the cable. To glance at the dynamo puter as a source of actual damage there is a possibility ... but it is very small, because the dynamo will only be damaged if there is a break in the coil, basically the dynamo is very difficult to damage especially the use never reaches for hours.