HOW TO USE WASH MACHINE

Washing machines are electronic devices that are useful for washing clothes. almost everyone knows how to use this tool but for some people who are still new or just have it, they are confused about how to get started. for that I will share a little experience for those of you who need it.


Make sure the electrical connecting cable has not been inserted into an electrical outlet.
Wash 

1. Arrange the drain button on the wash position (not drain).
2. separate clothes that are easily worn off from other clothes so that the fade does not spread to other clothes, for clothes that are easily washed, wash them down.
3. Prepare a bucket of water and detergent (the dose is adjusted according to the amount of clothing to be washed or read the petuinjuk on the detergent wrapper) then stir until the detergent dissolves with the water.
4. Add the water that has been mixed with detergent into the washing machine and add clean water about two thirds of the washing machine.
5. Enter the clothes that will be washed into the washing machine until it is completely submerged and let stand for 15-30 minutes so that the dirt that is attached to the clothes is released, try the number of clothes not to exceed two thirds of the tube inside the machine so that the machine can spin optimally.
6. After being left idle for a few minutes, insert the electric connecting cable / plug into the wall socket and turn the automatic timer / timer button on a half-turn and let it stand until the machine turns itself off.
7. If the engine is completely dead, try opening the engine cover and see if the clothes are clean? if it's not clean, try stirring the clothes and repeat the washing process by replaying the automatic timer / timer button.
8. After washing, remove washed water by turning the drain button to the drain position.
9. After all the water is wasted turn around the button to drain the water to the wash position.

Rinse 

1. Refill the washing machine tube containing clothes that have been washed with clean water until all the clothes are submerged,
2. rotate the self-timer / timer knob about a quarter turn (this is the rinsing process so that the detergent foam attached to the fabric fibers is released).
3. If the machine has completely stopped repeating the rinsing process so that the detergent foam that is attached to the fabric fibers is completely released or if necessary add perfume or softener to the clothes.
4. After finishing rinsing, remove the washing water by turning the drain button to the drain position.
          

Dry out

1. Put the rinsed clothes in the dryer tube and press the clothes that have been entered to fill the dryer tube.
2. after the dryer tube is fully filled, turn the spin button clockwise approximately half a turn then wait for the dryer to stop completely until no sound is heard from inside the machine.
3. After the machine is completely stopped, open the dryer tube cover, make sure the clothes inside the machine have stopped rotating, take clothes and move them to another container for further drying.
4. If when the drying machine is playing a noisy sound like there is a curling * lm * kul of the engine body from inside, this means the dryer tube is labile due to the lack of density of clothing inside, open the lid and let stand for a while until the machine stops spinning and press the clothes inside then try to close and turn it back on.

When done, don't forget to pull the plug out of the wall socket and clean the outside and inside of the washing machine until it's dry.